UT – Level II (Theory) online course has 10 Hours Video; 59 Lectures, 280 slides, 250 Practice & Exam Questions within 4 sets of Practice Questions and finally the general and specific exam papers.
Course Introduction
Why E-Learning Training Course?
To be directly qualified for ASNT UT Level II Certification, you should complete 80 Hours of organized training and also pass General, Specific and Practical Exams.
According to ASNT SNT TC 1A (2020 Edition), Section 7.1; The organized training may include instructor-led training, personalized instruction, virtual instructor-led training, computer-based training, or web-based training.
The current online training course meets the requirements of ASNT SNT TC 1A and ANSI/ ASNT CP-105: ASNT Standard Topical Outlines for Qualification of Non-destructive Testing Personnel for organized training. It also include General & Specific Examination.
What will I learn?
This course will teach you about NDT Certification; Sample Procedure & Report; Written Practice; All about Ultrasonic Testing; Welding processes and Defects; ASME V; Metallurgy, Manufacturing & Fabrication; Casting & Forging.
Please look at our “Course Content” for complete information.
Once you have completed the training course and passed the general and specific exam papers; you shall be issued a certificate of achievement worth 40 CPD credit hours.
What happens if I fail the theory papers?
If you fail the general and /or specific exam papers (minimum pass grade is 70%); your course progress shall be reset, which means you are required to repeat the course free of charge.
If you wish to be certified as an internationally recognized ASNT UT Level II; You can then register for one of our 1 day practical classroom training & exam across the world (additional charges apply subject to availability).
We provide 120 days 24/7 course access & online support via 
& 
Difference between ASNT; PCN and ISO 9712 Certification
Course Features
- Lectures 59
- Quiz 1
- Duration 120 days
- Skill level All levels
- Students 225
- Certificate Yes
- Assessments Yes
Curriculum
- 9 Sections
- 59 Lessons
- 120 Days
Expand all sectionsCollapse all sections
- Module 1ASNT SNT TC‐1A2
- Module 2Sample Procedure & Report; Written Practice/Certification Procedure2
- Module 3All about Ultrasonic Testing (UT)7
- Module 4ASME V - Non Destructive Examinations18
- 4.1Introduction
- 4.2Terms & Definition
- 4.3Art. 1 – Gen. Requirements
- 4.4ASME V – Art. 4 – UT
- 4.5UT Flash Card # 1
- 4.6UT Flash Card # 2
- 4.7UT Flash Card # 3
- 4.8UT Flash Card # 4
- 4.9UT Flash Card # 5
- 4.10UT Flash Card # 6
- 4.11UT Flash Card # 7
- 4.12UT Flash Card # 8
- 4.13UT Flash Card # 9
- 4.14UT Flash Card # 10
- 4.15UT Flash Card # 11
- 4.16UT Flash Card # 12
- 4.17UT Flash Card # 13
- 4.18UT Flash Card # 14
- Module 5Metallurgy, Manufacturing & Fabrication; Casting & Forging; welding processes5
- Module 6Power point Presentations3
- Module 7Practice Questions5
- General and Specific ExamsExam Time1
- Additional Study Material - OptionalNot part of Syllabus or exam (Downloadable)17
- 9.1Basic NDT
- 9.2UT basic
- 9.3UT Transducers
- 9.4Thick. Measurement
- 9.5Flaw Detection
- 9.6Ultrasonic of Steel Weld
- 9.7UT couplant
- 9.8Scanning Curved Beam
- 9.9Curved Correction
- 9.10Circum. Scanning
- 9.11AME VIII Acceptance
- 9.12Classroom Training
- 9.13UT Level II – GE
- 9.14UT Level III Course
- 9.15UT Question Bank
- 9.16UT Phase Array #1
- 9.17UT Phase Array #2
