Quiz

Question 1 of 47

1. All of the following are the monitoring and reporting duty of Pipeline Inspector except:

all aspects of pipeline construction

be involved with the contract and agreement,

monitor safety and health, environmental aspect

Contractor’s methods of working.

 Loading...

Question 1 of 47

Question 2 of 47

2. WPS qualifications and NDE acceptance criteria is brought in:

API 1104

API 1110

API 936

API 598

 Loading...

Question 2 of 47

Question 3 of 47

3. Pressure testing procedure of of pipeline shall be according to:

API RP 1110

API 1104

API 660

API 1140

 Loading...

Question 3 of 47

Question 4 of 47

4. Crossing Company  is  the  one  to  install,  operate  and  maintain  a  new pipeline and who needs owner’s approval of his crossing plan when reached within ----- of existing facility.

50 feet

50 yard

50 meter

50 inch

 Loading...

Question 4 of 47

Question 5 of 47

5. Owner’s representative shall be present when crossing company is excavating within ----- of existing facility.

25 feet

50 feet

100 feet

12 feet

 Loading...

Question 5 of 47

Question 6 of 47

6. Due Diligence Corridor is the survey corridor plus:

 

50’ on each side

25’ on each side

50’ on right side

50’ on left side

 Loading...

Question 6 of 47

Question 7 of 47

7. You can excavate up to …….. from existing facility with motorized equipment. After that you should be careful when excavating any closer.

25'

50'

75'

100'

 Loading...

Question 7 of 47

Question 8 of 47

8. Excavation Tolerance Zone is …… from existing facility. This means getting any closer to the existing facility should be by non mechanized equipment.

24"

12"

36"

18"

 Loading...

Question 8 of 47

Question 9 of 47

9. The closest distance between existing facility and new pipeline shall be minimum …...

12'

36"

24"

12"

 Loading...

Question 9 of 47

Question 10 of 47

10. Crossing Angle of New pipe should cross the existing pipe at …. ideally but not less than …..

45º ; 90º

90º ; 45º

90º ; 90º

45º ; 45º

 Loading...

Question 10 of 47

Question 11 of 47

11. The new pipeline burial depth shall be minimum:

18"

12"

36"

56"

 Loading...

Question 11 of 47

Question 12 of 47

12. What a Plat or a plot of land should show?

any existing buried facilities and rights of way.

plot boundaries

latitude

location of infrastructure

 Loading...

Question 12 of 47

Question 13 of 47

13. The purpose of aboveground markers is:

To identify underground facilities,

To locate for excavation

To circumvent the one call process

To allow for excavation

 Loading...

Question 13 of 47

Question 14 of 47

14. Aboveground markers are developed during the design process and include the following except:

The company name,

Type of facility,

Emergency contact,

Owner’s number.

 Loading...

Question 14 of 47

Question 15 of 47

15. Pre-bid conferences provide a forum for the contractor, owner, and other interested parties to discuss the following except:

The project and record the binding changes or clarifications to the scope of the project

To review contract documents

To review regulatory requirements, schedules

To finalize the cost

 Loading...

Question 15 of 47

Question 16 of 47

16. A facility owner/operator need only belong to a:

Single one call center

Two adjacent one call center

Any number of one call center depending the geographical location

The central one call center

 Loading...

Question 16 of 47

Question 17 of 47

17. The color code for Gas/oil is:

Yellow

Red

Blue

Green

 Loading...

Question 17 of 47

Question 18 of 47

18. The corridor marker indicates:

The width of the facility

The length of the facility

The height of the facility

The area of the facility

 Loading...

Question 18 of 47

Question 19 of 47

19. Before excavation, the excavator calls the one call center at least:

5 working days

10 working days

2 working days

3 working days

 Loading...

Question 19 of 47

Question 20 of 47

20. When the excavation site cannot be clearly and adequately identified on the locate ticket, the excavator designates the route and/or area to be excavated using ….. pre-marking

White

Blue

Red

Orange

 Loading...

Question 20 of 47

Question 21 of 47

21. Excavation Tolerance Zone is …… from existing facility. This means getting any closer to the existing facility should be by non mechanized equipment.

24"

12"

36"

18"

 Loading...

Question 21 of 47

Question 22 of 47

22. What is the best definition of cadastral boundries?

Landowner limits

Pipeline ROW limits

Road allowance limits

Legal and ownership limits

 Loading...

Question 22 of 47

Question 23 of 47

23. The inspector's role in Job Safety Analysis (JSA) is to:

modify the JSA

Complete the JSA

Participate in the JSA

lead the JSA

 Loading...

Question 23 of 47

Question 24 of 47

24. Which of the the following locations would require more frequent intervals for center line staking?

side bends

class 3 location

water bodies

HDD locations

 Loading...

Question 24 of 47

Question 25 of 47

25. The contractor should be monitored for adherence to their internal requirements, as well as which of the following:

Safe use of tools

Loss prevention strategies

One-call negotiations

Projecr specific requirements

 Loading...

Question 25 of 47

Question 26 of 47

26. Typical monitoring agreements for as-builts include:

confirming the construction surveyors are collecting as-built data continually during construction

designating a single person to collect and documenting as-built information for consistency

streamlining the process by moving to electronic monitoring of as-built information

documenting that as-built information is collected as required to maintain construction schedule

 Loading...

Question 26 of 47

Question 27 of 47

27. One aspect of promoting a positive image that is representative of the operator includes:

allowing landowners to borrow equipment to improve their land

posting only positive information regarding the project on social media sites

showing respect through good driving habits on the right of way or public roads.

working with them to be set a work schedule that best fits their needs

 Loading...

Question 27 of 47

Question 28 of 47

28. If required by the project due to logistical or environmental restraints, which of the following methods can pipe be installed without a trench?

Horizontal Directional Drilling

A self-excavating dredge

Trenchless slurry method

A flowable fill system

 Loading...

Question 28 of 47

Question 29 of 47

29. With respect to drying pigs, who provides the specific requirements regarding this task?

The contractor

The operator

The inspector

The pigging crew

 Loading...

Question 29 of 47

Question 30 of 47

30. What should the inspector be capable of with respect to safety meetings?

Observing and documenting the safety meetings

Evaluating how safety meetings are conducted

Developing the scope of safety meetings

Organizing and conducting the safety meetings

 Loading...

Question 30 of 47

Question 31 of 47

31. Who defines the inspector's authority to the contractor?

The regulator should maje the contractor aware of the inspector's duties and authority

The operator should maje the contractor aware of the inspector's duties and authority

The union should maje the contractor aware of the inspector's duties and authority

The regulator and the operator should maje the contractor aware of the inspector's duties and authority

 Loading...

Question 31 of 47

Question 32 of 47

32. With respect to timber and branch removal, burning activities should comply with which of the following?

Landowner requirements

Survey requirements

Contractor requirements

Owner requirements

 Loading...

Question 32 of 47

Question 33 of 47

33. For regulatory agency inspections and visits, which of the following best describes the inspector's responsibility?

Providing requested information to the regulator

Organizing and conducting the agency visit

Scheduling agency visits

Following operator procedures

 Loading...

Question 33 of 47

Question 34 of 47

34. Which of the following statements best represent code of conduct considerations regarding job responsibilities?

Inspectors are not to to perform contractor construction tasks.

Inspectors should modify welding procedures as required by the project.

Inspectors should be willing to assisst with any construction task.

Inspectors may assist in construction activities if properly qualified.

 Loading...

Question 34 of 47

Question 35 of 47

35. What should be done with stumps on the ditch line?

Confirm that stupms are grubbed, and other debris is cleared from the ditch line but stored within the ROW

Confirm that stupms are grubbed, and other debris is cleared from the ditch line but mulched for backfill

Confirm that stupms are grubbed, and other debris is cleared from the entire ROW but stored along the ditch line

Confirm that stupms are grubbed, and other debris is cleared from the ditch line but stored but spread beside the ROW

 Loading...

Question 35 of 47

Question 36 of 47

36. What behavior is included in the code of conduct for an inspector?

Ethical, professional, consistent, reactive, and honest

Ethical, authoritative, consistent, subjective, and honest

Ethical, judgemental, consistent, objective, and honest

Ethical, professional, consistent, objective, and honest

 Loading...

Question 36 of 47

Question 37 of 47

37. When monitoring blasting, what velocity needs to be measured by the contractor?

Shock wave velocity

Peak particle velocity

Sound wave velocity

Ground wave velocity

 Loading...

Question 37 of 47

Question 38 of 47

38. Who is responsible for setting the requirements for a job safety analysis (JSA)

The inspector and affected personnel

The operator and Contractor

OSHA along woth local jurisdictional requirements

The safety lead along with site security

 Loading...

Question 38 of 47

Question 39 of 47

39. When surveying in high crop areas, how should ROW boundries be marked?

Taller survey stakes

Brighter colored survey stakes

8 feet bright fluorescent green flagging

More frequent survey stakes

 Loading...

Question 39 of 47

Question 40 of 47

40. What material can be used for road approaches?

Any salvaged material

subsoil, no topsoil

subsoil or top soil

select material

 Loading...

Question 40 of 47

Question 41 of 47

41. According to API 1169, which statement best defines operator?

Organization that has regulatory authority over the pipeline

Organization that designs the pipeline

Organization that own and/or operates the pipeline

Organization that builds the piepeline.

 Loading...

Question 41 of 47

Question 42 of 47

42. Before excavation equipment can pass over a loaded line, which of the following precaustions  must be taken?

Inspect backfill material areas for soft spots, rocks, and adequate depth of cover

Mark the crossing location with a stake with blue ribbon and station a signaller near the crossing.

Confirm the excavation equipment in good working order and the bucket has been raised.

Examine the equipment for leaks, worn treads and confirm the operator moves slowly across the pipe.

 Loading...

Question 42 of 47

Question 43 of 47

43. Which of the following best defines quality?

The degree to which an object meets the manufacturing and operator's standards.

The degree to which arequirements are fulfilled by an object;s inherent characteristics.and operator's standards.

The degree to which an object meets the operator's requirements

The degree to which an object meets the manufacturing and operator's requirements.

 Loading...

Question 43 of 47

Question 44 of 47

44. Following pipeline pressure testing, the inspector should confirm:

The buoyancy requirements and monitor weight placement

that all required non destructive examination (NDE) is completed.

that pipe bends are fitted in the trench properly

that check valves are installed in the corrct orientation and flow direction.

 Loading...

Question 44 of 47

Question 45 of 47

45. What document lists any special concerns of individual landowners?

Alignment sheets

ROW agreements

Crossing agreements

Line list

 Loading...

Question 45 of 47

Question 46 of 47

46. When clearing wetlands, how should tree stumps be dealt with?

Cut flush to the terrain surface and not grubbed

Grubbed and kept on the ROW

left high enough to allow removal in the future

Grubbed and removed from the ROW

 Loading...

Question 46 of 47

Question 47 of 47

47. RT shows a straight linear indication.

Accept

Evaluate

Reject

Ignore

 Loading...

Question 47 of 47