Packing & storage

Share This Post


Fixed equipment is normally packed for outdoor storage for one year or as agreed with the purchaser.

Rotating equipment should have package suitable for outdoor storage without maintenance for a period of minimum six months or as agreed with purchaser.

Some equipment can only packed for indoor storage and still some equipment should be stored under controlled temperature and humidity , for example,  electrical equipment, consumables and the like.

Packages normally have desiccants to reduce the moisture level that could corrode the components  while Some equipment are shrink wrapped to avoid corrosion and ingress of contaminants.

Some equipment is added with anti corrosive agents for protecting internals.

spools and flanges may be protected by oil and capped to avoid damages to the flange face.

Equipment shall be secured within the packaging.

Lifting lugs shall be clearly marked. 

Directional arrow on the box shows the side package shall rest upward.

Installation, Operation and Maintenance Manual (I O M) and storage procedure shall be part of the dispatch dossier.

Equipment shall have a designated storage area within the site and shall not be frequently moved around until installed.



Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Inspector Continuous Improvement

  Continuous Improvement: At the completion of the inspection activities; a PDCA cycle (plan, do, check, act) review is taken as part of a continuous improvement program to determine which activities went well and where improvements should be made. Any

Maximum Allowable Working Pressure (MAWP)

  It is the maximum gauge pressure at the top of a pressure vessel allowed by design or code calculations for a set temperature. When the working temperature decreases or significantly increases, material strength is reduced and therefore the pressure

Do You Want To Boost Your knowledge?

See our Coursses